How to Properly Grind Down a Tree Stump with a Stump Grinding Machine

[Daily Grind]

How to properly grind down a tree stump the right way with a stump grinding machine there are several sizes of stump grinding machines, from the smaller units that you can fit onto your back, and carry up a slope or hill, and grind down medium to small size tree stumps. And then there are medium size stump grinders that you can generally rent from your local rental yard store. Then there are bigger size machines, that need more room, and usually charge more, but can do them faster. You also have giant size machines that can blow you away, if you can find a clip on YouTube or cable television. Bamboo Grinding and Removal in Auckland

We will assume you are going to do it yourself, and you rent a standard size 13hp stump grinding machine. The front of the machine has a blade almost like a circular saw, but with carbide teeth. These teeth are very hard, and if you want to grind them down yourself, you need a green grinding wheel to do that.

The one of the biggest hazards of stump grinding, is one of the teeth can fly out, and I own 2 stump grinding machines, with a small part time stump grinding business in San Diego. And I have saw what a stump grinding tooth can do when it comes out. The guard over my machine is metal, and the strait tooth shot right threw the metal, and it was a perfect square, with protruding metal, just like a bullet hole. So you have to make sure the teeth are totally tight. Check for any loose teeth, and best to tighten each one, especially if it is a rental, the guy at the shop might not be the brightest light in the shed, so take it open yourself, the teeth coming out is the most dangerous thing just about. Bamboo Removal Service Near Auckland

Most cities have a telephone number that you can call if you want to dig in your yard. Most stump grinding usually goes down about 6 inches below the grade, so you can put in your concrete, sod, new grass, mulch, new yard, or whatever, and the machines can go down deeper than that, but the more deeper, the more harder to control the machine.

Once you have the machine in front of the stump, set the blade up on the stump, and then make sure the wheel is off the stump, and start the machine, each machine will be different, some will be self propelled, some with brakes, some with different things. One stump grinding machine I have is for going up close to the house or fence, and getting it to the side, without hitting things. Bamboo removal specialist in Auckland

Stump grinding is hard work. You will sweat if you have a pretty good size stump. It's also fun to stump grind. You just have to slowly slide the machine back and forth, over the stump, and slowly start watching the stump turn to butter from the machine. It will shoot out your side discharge, and pile up.