What Should Be Paid Attention To In The Daily Maintenance Of Cnc Machining Center Of Lijin Group

[Korn Allie]

the following problems should be paid attention to in the maintenance of CNC machining center of Lijin group:

1 Machine tool hygiene; Pay attention to internal and external hygiene. Wipe the outside of the machine tool every day to ensure that the outside is clean and beautiful. The internal iron filings should be handled in time The chip removal machine must be turned on during processing, otherwise it may get stuck

2. Use of lubricating oil; The lubricating oil shall be added once every three days to ensure that the lubricating oil is sufficient and all shafts are lubricated in place. The lubricating oil chamber shall be cleaned once every three months to ensure that there is no caking at the bottom of the chamber

3. Use of cutting fluid; The cutting fluid shall be clean without peculiar smell, and the chips shall not fall into the cutting fluid chamber to prevent the infusion pipe from being blocked Damage the cutting fluid motor The cutting fluid should be changed every three months Ensure that the cutting fluid is clean

4. The filter screen of the cooling exhaust milling operation fan of the machine tool and the filter screen of the cooler shall be cleaned once a week to prevent dust from entering the precise parts of the machine tool, short circuit and damage

5. The machine panel and keys need not be wiped with corrosive liquid to prevent damage

6 Each machine must have a person in charge of machine tool maintenance

7 Prevent machine collision and strong cutting, so as to prevent damaging the spindle of the machine tool and affecting the accuracy of the machine tool

8. No one is allowed to stand on the sheet metal to prevent the sheet metal from deforming and the cutting fluid from entering the guide rail and affecting the accuracy of the machine tool