Fax Setting Parameters™
TX Settings (Transmission Settings)
Immediate TX
Default: [Off]
Select this when using Immediate Transmission.
Select this when using Immediate Transmission for the next transmission only.
Specifies the resolution to use for scanning originals.
Standard
Fine
Photo
Density
Default: [Normal]
Normal
Pause how to send and receive fax online Key Time
Default: 3 seconds
Auto Redial
Sets the machine to redial the fax destination automatically when the line is busy or a transmission error occurs, if the machine is in Memory Transmission mode. The number of redial attempts is preset to two or three times, depending on the [Country Code] setting under [Admin Settings], in five-minute intervals.
Sets the machine to add a header to every fax you send. The header includes the current date and time, user fax name and number, job ID, and page information.
Specifies the settings for receiving a fax.
Specifies the reception mode.
Fax Only
Manual
The machine rings when it receives incoming calls. The machine receives faxes only when you manually receive faxes.
The machine receives faxes automatically when a fax call is received. Otherwise, the connected telephone answering device answers the call.
The machine receives faxes automatically when a fax call is received. Otherwise, the machine starts to ring.
Sets the machine to reduce the size of a received fax if it is too large to print on a single sheet of paper.
Note that the machine only reduces the size down to 74%. If further reduction is required to fit the fax on a single sheet, it will be printed on separate sheets without being reduced.
(Default may be [Off] depending on the [Country Code] setting under [Admin Settings].)
On
Specifies the number of times the machine rings before it starts to receive faxes in Fax Only mode.
3 to 5 times, in increments of 1
Specifies the length of time the machine tries to detect the fax calling tone in FAX/TEL mode.
5 to 99 seconds, 1 second increments
Tray Use: Fax
Specifies the tray for printing received faxes. Note that only A4, Letter, or Legal size paper can be used for printing faxes. Make sure to select a tray that contains paper of the valid size.
Default: [Auto]
The machine uses tray 1 and tray 2 if they contain paper of the same size. In this case, the machine starts to print from tray 1. If tray 1 runs out of paper, the machine automatically switches to tray 2 to continue printing. If tray 2 runs out of paper, load paper in tray 1.
Tray2 Only
Deletes unsent fax jobs remaining in the machine's memory.
Memory Job Clear
To delete a fax job, select the desired job, and then select [Clear]. Selecting [Not Clear] exits to the previous level of the menu tree without deleting the fax job.
To delete the fax jobs, select [Clear]. Selecting [Not Clear] exits to the previous level of the menu tree without deleting the fax job.
Welkom bij
Beter HBO
© 2024 Gemaakt door Beter HBO.
Verzorgd door
Je moet lid zijn van Beter HBO om reacties te kunnen toevoegen!
Wordt lid van Beter HBO