How to choose the right LED Strip Light

[CarpetCleanerCoventry]

LED rob lights, lace or tapes have become one of the most popular LED products available. They did not only replace incandescent lace, but some of the fluorescent tubes as well, and definitely gave endless sources of advertisements and decoration of bars, hotels, and other public places. With the fast development of the LED technology, they are now available in very bright versions too, allowing users to apply it as task, or in rare cases, even as a principal source of lighting. Their application is popular both in home and commercial use, therefore we collected the main characteristics of rob lights consumers need to consider if they want to make the right choice.led strips lights

Of all the determining factors mentioned above, the most important is just about the type and size of the LED included, both that determine its purity or performance. This difference had been discussed in one individuals previous articles on ArticleBase. com: how the performance of different LED technologies (low power, SMD power and high power) ranges, as well as the size of the diodes. Obviously, the more recent the technology of the LED is, and the bigger its size is, the happier it will be.

Another determining factor of the performance is of course the number of LEDs in the rob within a metre for instance. The higher this number is, the happier the rob is, though extremely high numbers within a metre often require special technologies, like double width guards : where the LED are put not just one after the other but in two or three rows next together. With guards including a high number of LED always check their arrangement, because LEDs placed too close together may release too much heat and radically shorten the charge lifespan of the rob.

Along with array of the LED is now endless, since any colour can be created with RGB technique. There are generally two or three shades of white available: bright or cold white : the bluish, really bright version of white, the warm white : which is rather yellow-colored like the sun, and the natural white : which is a combination of the two in various degrees. The temperature of the white colour is measured in Kelvin, and the higher colour temperatures (from about 5000 K) are the cold, or bluish whites and the lower ones (2700 : 3000 K) are the warmer white colours.

Single colour LEDs are available in almost all colours now, but the RGB LED guards can also release a large variety of colours. RGB guards desire a controller to operate, and decide whether the colour of the rob should be one constant colour, or should change along with setting the pace of change. Special pixel RGB guards are able to change along with in a row, creating a run-down effect. The wide range of colour changes of the RGB rob largely depends on the knowledge of the controller too.

The flexibility of the LED guards can be a determining consider their application. Rigid guards are perfect for replacing fluorescent tubes for instance, though there is hardly anything you would not be able to do with a flexible rob either. On flat surfaces it is sometimes easier to work with rigid guards, though applied on ceilings or walls : I guess many of you have come across this problem before : what appears to be flat for the eye is far from straight once examined with a spirit level. So, flexibility is more often a acceptance when compared to a burden.
Guards are usually flexible to at least one dimension only, which is exactly she the direction of the LEDs can be significant. The most common types of guards have LEDs lighting up wards, so if for instance if you wish to illuminate a wheel you have to look for side-mounted or side-view guards to be able to shape them the right direction.

The carrying capacity of guards is generally very low. Heavy-duty rob lights are not usually sold for home use, but much rather for commercial use on cruises and in producers for instance. In home use, where carrying capacity matters : on an edge of a stairway for instance : the use of profiles is the common solution.

The IP rating of guards or any electric goods comprises of two numbers, indicating the amount of protection provided up against the intrusion of solid objects (including body parts like hands and fingers), dust, animal contact, and water in electrical enclosures.

If you are planning to install rob lights at wet or humid places, outdoors, or maybe even under water, in that case your items need to be to some extent or completely waterproof. 100% waterproof items have the IP rating of 68.

The Voltage of LED rob lights should always be checked before application. Guards running at mains are often used, but most of the LED guards require a transformer, simply because they run at low voltage (usually 12 or 24 V). If your guards desire a transformer, make sure it is suitable for LEDs, because electric transformers most of the time ruin LEDs.

The wide range of moods or atmospheres that can be created with rob lights is incredibly large and a lot depends on the accessories you use with them, like dimmers or controllers. Although the largest variety of RGB effects are created with panels, where there is no limit to the effects used other than our imagination, there is a lot you can do with guards too, applying complex controllers, like the DMX, allowing you to set the flow of colour change to music. Dimming is always simply attainable, though most guards require a dimmer specifically manufactured for LEDs.