DPF Cleaning Processes

[dpffilter]

DPF cleaning processes typically include a device using compressed or pulsed air to blow entrapped ash out of the filter and into a collection bin. This portion of the process emits particulate matter and emissions are controlled by integral filters or an external dust collector. The process may also include a thermal cleaner or oven that bakes the filter to remove any soot or other organic material that cannot be removed using the air cleaning process. Diesel Particulate Filter (DPF) Cleaning processes emit air contaminants including oxides of nitrogen, carbon monoxide, volatile organic compounds, oxides of sulfur, particulate matter and toxic air contaminants and require a permit to operate - Complete DPF Cleaning Service in Dallas.

A diesel particulate filter or DPF is a anti-pollution engine component located at the outlet of the vehicle’s exhaust manifold. It is fitted to both diesel and petrol vehicles. It is installed after the catalytic converter and before the silencer. It is equipped with a honeycomb filtration system that retains the fine particles resulting from the combustion of the air/fuel mixture. As these particles can be carcinogenic for humans and highly polluting for the environment, the DPF has a very important role to play in the fight against pollution - Complete DPF Cleaning Service.

Application forms tell us about your operation and allow us to permit your process. Accurate and complete information decreases processing time and helps avoid additional charges for unnecessary revisions. Please carefully review and complete the following forms.  The cleaning method uses a special machine that injects liquid directly into the filter. A particle filter operates in 2 stages. The first stage filters out particles, while the second removes them.

The primary function of the DPF is to filter and capture the fine particles present in the exhaust gases. This forms a layer of soot on the filter walls. Periodic regeneration is therefore necessary to regularly remove the soot. DPF regenerations take place in automatic cycles during which the temperature of the exhaust gases is greatly increased in order to burn off the soot deposits. For more information, please visit our site http://dpffilter.com/