tenergy balance charger instructions
tenergy lipo charger
tenergy smart ac chargertenergy balance charger blinking red light

21 Jan 2012 Insert 1 – 4 pieces of Tenergy Li-ion 3.7V 650mAh RCR123A rechargeable batteries into the battery compartment. 3. Make correct contact for polarity (+ and -), place the battery positive (+) side toward to Tenergy logo. The LED will light up in red to indicate proper charging. It is a Smart Charger for Ni-MH battery packs 8.4V-9.6V (7- 8 cells ). Strongly suggest use recommended batteries by Tenergy like Tenergy brand high drainTenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V - 12V). Item #01025 Download Product Manual Here; UPC Code: 844949001601 TENERGY CORPORATION. User Manual. • It is a smart charger for any NiMH/NiCD battery packs from 12V-24V (10-20 cells packs). • 100~240V AC input for worldwide use. • DO NOT operate the charger when the temperature is higher than 40?C. Step 1: Put the temperature sensor onto the middle surface of battery pack. Thank you for purchasing Tenergy 1~4S LiPo/Li-ion/LiFePO4 charger! Please read the manual carefully before using this charger. Features. 1. Built-in balancer. Weight: 0.6LB. Operation Instruction: Connect battery pack to output connector and plug AC power source 2. Make sure battery polarity is connected correctly (Red wire = positive) 3. Cautions: Please don't use the charger for low capacity battery pack (<1000mAh). TENERGY CORPORATION. Temperature sensor usage 11 Feb 2016 The Tenergy TB6B is an all-in-one balancing charger for NiMH/NiCd/Li-ion/LiPo/LiFe/SLA battery packs. This document provides directions for Tenergy T-1199BE Universal 4 Bay NiMh Charger IMPORTANT SAETY INSTRUCTIONS ( CAREFULLY FOLLOW THESE INSTRUCTIONS BEFORE USE ). 22 Jan 2013