The MPC5674F employs the e200z7 core, instead of the e200z6 core used on the MPC5566. The e200z7 core is instruction-set equivalent with the e200z6 core, however some new instructions and features are added to the e200z7. The essential differences in the two cores are described in the following bullets. User's Manual. Version 2.2. July 31, 2014. Title Page 1.3 Implemented Instruction Set. (like on ARM, PowerPC) while the RISC-V performs conditional branching based The RISC-V represents a well tested standard floating point instruction set with As the manual describes, the AUIPC instruction was added for dealing. Powerpc Instruction Set Manual EREF: A Programmer's Reference Manual for Freescale Embedded Processors, Rev. 1 Freescale Semiconductor iii Contents Paragraph Number Title Page Number About This Book Contents Chapter 1 Overview 1.1 Overview—Power Architecture Technology a nd the Freescale Embedded Implementation These operating instructions are valid for the components of the ET 200S Distributed I/O System. These operating instructions contain a description of the components which were valid at the time the manual was published. We reserve the right to enclose a product information NXP Semiconductors MPC5777M Datasheet . Hide thumbs . Also See for MPC5777M (e200z7), one of which is a dedicated lockstep core. Refer to the MPC5777M Microcontroller Reference Manual's Fast Ethernet Controller (FEC) chapter for details of this option and how to enable it. cache.freescale.com The reference manual document for SPC567xF has been updated for 3M17W and 0N31E masksets. The new description updates are added to the signals PMC,FMPLL,SIU,e200z7 Core, SWT, eQADC, EBI and NDI chapters. PMC eQADC EBI. There is no impact to device form, fit, function or reliability. About this Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer E200-8D. Installation and ma