cpqrack-mib
hp bladesystem onboard administrator command line interface user guidehpe onboard administrator user guide
hpe bladesystem onboard administrator command line interface
hp onboard administrator snmp mib

This guide details using the command-line interface for configuration, operation, and of the HPE BladeSystem Onboard Administrator 4.85 (or later) and the HPE BladeSystem c3000/c7000 Enclosure hardware installation.. 30. Installing .. Configuration Management screen. . Enclosure SNMP Settings screen. ILO supports the great RIBCL protocol, that is by far the best option for monitoring HP C3000 and C7000 series bladesystems support the CPQRACK-MIB MIB SNMP Settings The Onboard Administrator supports SNMP Version 1 and several groups from the standard MIB-II MIB. Additional information about the. hsmith: Agent Smith: Posts: 3539: Joined: Thu Jul 30, 2015 4:09 pm: Location: combine the information there about sending snmp traps and the MIB with here about setup SNMP Traps with Nagios and you will have a win 14 Nov 2012 It's true that the blades contained in a bladesystem enclosure -since are HP C3000 and C7000 series bladesystems support the CPQRACK-MIB MIB . When enable the SNMP agent on a BladeSystem it's necessary enable Enclosure SNMP Settings screen Use the Enclosure SNMP Settings screen to configure or modify the SNMP settings for the active HP BladeSystem Onboard. PRTG Manual: SNMP HP BladeSystem Blade Sensor. The SNMP HP BladeSystem Blade sensor monitors the status of an HP BladeSystem via Simple Network 18 Feb 2009 Hi: I'm trying to get individual blade power meter readings on a HP Bladesystem c7000 enclosure through SIM. The blades have the correct ILOAccessing the HP BladeSystem c3000 Insight Display . . Directory Services Configuration screen . Enclosure SNMP Settings screen.