What Are The Contents Of Cnc Machine Adjustment

[Jennell Allie]

adjustment steps of fanuccnc CNC system

1. Connect the power supply: connect the control power supply of CNC to carry out basic picture operation, including connecting the control power supply, connecting MDI /CRT, adjusting the touch panel and carrying out basic operation
2. Connect reader and punch interface: connect the cable between rs232-c interface and punch panel to enable input and output with I /O equipment
3. Initial setting of CNC parameters: set basic parameters such as axis name and servo ring gain * input method of CNC parameters, * set CNC parameters
4. Connect the machine interface: connect the interface signal between the operation panel and the strong current circuit* The address table of input and output signals, that is, the address allocation of I /O link* Type of machine interface
5. Prepare PMC program: prepare PMC program, * PMC function, * use built-in programmer, * use PC to prepare, * confirm input and output signals
6. Connect servo: set digital servo parameters, connect servo amplifier and servo motor * initial setting of digital servo * connect servo amplifier * set fssb parameters

7. Confirm operation action: confirm manual feed and automatic operation * operation preparation * manual feed * handwheel feed * set reference point * edit machining program * automatic operation * m function

the adjustment includes the following points: 1 Select the appropriate fixture according to the processed products Fixture. 2. Install the fixture Fixture. 3. Select the required tool, adjust the magazine number and tool compensation. 4. It is easy to program and difficult to select products according to the complexity of the computer. 5. Import the program into CNC. 6. Check and modify the tool number in the program. 7. Calibrate the X and Y coordinates of the workpiece, Enter the CNC coordinate system. 8. Start trial processing after all items are completed until the first qualified milling operation product is processed and the machine adjustment is completed.

it should be about setting the knife and establishing the knife compensation!