Usage Of [Nc] Programming Instruction G94

[Aquilino Hession]

G94 is the feed per minute mode, which is also the default mode of general systems
g95 is the feed mode per revolution, which is commonly used in rigid tapping

for example, in Frank format, intercept a main code. When using g95, the feed is equal to the pitch. After the fixed cycle is completed, enable G94 to prevent the milling cutter program behind tapping, resulting in "feed error"

M29

_ Y_ Z_ R10. 0F1. 5；

G80；

G94；

G00Z100. more info 0

Ф 50 ~~~ ~~~ G0 X51 Z5 G94 X0 Z3 F0. 2 Z1 Z0 G0 x50 5 Z1 G90 X46 Z-50 F0. 2 X42 X40 G0 Z1 ~~~ ~~~