Woodworking Cnc Lathe Which Good

[Star Keith]

Xuzhou Fengzhan should be the first choice. Introduction to Fengzhan lathe: manager Lu Weibin

1 turning wood with two knives, one in front of the other behind the other, there is a gap of 1 cm in the axial distance between the two knives. At the same time, turning wood according to the set proportion. In terms of the total turning depth, we are divided according to the specified proportion. Both knives are cylindrical curves of operation, so the cutting force of each knife is greatly reduced. The cutting amount of the back cutter (i.e. forming cutter) is greatly reduced, so the forming cutter is relatively stable. Avoid knife marks caused by vibrating knife. (because the knife mark is the most difficult to polish), and because the two knives produce turning force on the column in the two measurements of the column, the runout of the column is greatly reduced and the finish of the turning wood is increased. This situation can speed up the speed and improve the finish
2 professional imported software, with photos taken and scanned for quick mapping; Manual programming is segmented manual programming, which is very non-standard. We generate it automatically by programming software. Accurate to one hundredth of a millimeter, and fast. A more intuitive cylindrical shape can be generated in the computer, and the cutting can be measured and modified at will
3 intelligently protect the worktable to prevent collision
4 intelligent automatic spindle speed change to prevent the danger caused by column bending and breaking off the column from the machine after turning wood. Reduce the trouble of replacing the belt groove and reducing the speed directly to the grinding speed. In processing engineering, the rotation speed and cutting speed can be increased or decreased due to the rotation of the main body without affecting the processing. It is especially suitable for processing large columns. The column head is slow and the column body is fast
5 pause /power-off memory function. After the power-off is suspended, start processing from the place where the power-off is suspended without repeated processing, because repeated processing will cause deflection because the center sleeve can not fix the processed column. Under the condition of deflection, repeated turning wood will damage the previously cut column
6 the convenient and flexible four claw self centering chuck is convenient for installing the column, and there is no need for the chuck to jam one end and find the center again. It is more accurate by centering on four sides. The whole feeding process takes only 3 seconds, and the accuracy is better than that of the automatic feeding frame; The thickened vase Turning Wood adopts automatic back knife and adjustable air cylinder, and the knife loading error can be allowed within two millimeters, which facilitates the operation of double knife turning wood for turning the thickened vase column, and improves the smoothness of turning wood and the durability of cutting tools; Our center support adopts the self weight of wood to be placed on the support, and the center is fixed in a natural state, while the side support is adopted, and the hand is used to maintain the state. Then the different hand force will make the center positioning of the column inaccurate, and the inaccurate center positioning will directly affect the cnc milling operation processing effect

find chezhibei knife machine on the Internet, and the best one in Taiwan. Such as guoya, Jinyuan, Junjie and Jingrong··········

intercontinental numerical control equipment Co., Ltd. completely replaces the manual handcart. Like the handlathe worker (4 knives), it can freely process back and forth and select any tool