What Are The Design Specifications Of The Machinery Factory It Mainly Refers To The Plant Planning And Plant Design Specifications

[Grayce Bird]

the machinery plant designs and plans the plant according to the products produced, and determines the height and width of the plant, the height and width of the plant door, lighting, ventilation and fire fighting must be considered. Pay attention to the drainage channel and sewage discharge, and install water, electricity and gas according to the station. Determine the size of water pipe, wire power and gas pipe according to water consumption, power consumption and gas consumption
plant planning is mainly based on the production process to plan the plant distribution and equipment placement. The principle of smooth production and transportation, short transportation distance, no interference, no backlog and saving time should be adopted

phoneding@tom

I don't have the current standards, but I can tell you the principles
plant planning ----- noisy types of work (riveters) should be placed where they are not annoying; The type of work with large vibration (forging worker) is placed where it is not milling operation sensitive to instruments and meters, so there is no way to deepen the shockproof ditch; The type of work with large dust (casting) is placed in the corner. Machining is placed on both sides of the back of the office building. The office building faces the factory door
plant design; The power distribution room is located in the southwest corner and the toilet is located in the northwest corner---------- Don't ask Feng Shui, I don't understand
the workshop director's office is in the south. The workshop director is only equivalent to the land lord. If you don't give him a room, you can use barbed wire fence
large equipment is placed on the main span, blank or workpiece must be placed next to the large equipment, and the large scoring table is placed on the main span
make your own arrangements
this arrangement is not reasonable. It should be processed according to - wood mold - casting - annealing kiln - machining. It's a mess. The sanitary environment is not good. Now most of them are arranged as I said - I see most of them too.