The Workpiece Processed By Cnc Milling Machine Has Problems, The Hole Drilled By The Center Has Burrs, And The Hole Drilled By The Drill Is Large Or Small. How To Modify The Program Or Setting.

[Garrigan Nurse]

the first problem is that the program cannot be pasted. There is a problem with the knife with shavings when drilling. Find a double-edged compound knife and better pour a little fillet. Use the counter spiral hollow knife to walk slowly and quickly. When the knife is fed and retreated, there are shavings when the protective peritoneum is brought up. Look, you should just learn to return it. Think slowly and understand the coordinate values. Basically, it can be said that half of the success depends on the size of your processing table. Generally, it is about 450x495. Look at the size of the product you want to process. Set a point where you want to place it on the table. The origin setting of your drawing is the same. Otherwise, if your drawing is different and the table is different, it will be limited in the process of making goods There is also programming. Why not easily set the workpiece depth? If you set it, raise the spindle, otherwise it will tie the table. Don't wash the table often. First, precision cnc machining understand the coordinates. If you don't understand, you can add it

if there is G10 in the program, just change the Z axis

the size of the hole drilled by the drill is controlled by the drill, which depends on your ability to grind the drill