Whenever you're connected, you will see the investigate toolbar.

Most debuggers have a comparable control system. This permits you to begin, stop, step, and restart your debugger. Since we see a pause and delay symbol, we're joined and prepared, so we should get venturing!

Venturing through code
Venturing through code is as much a craftsmanship as it is science. The primary thing you want to do is set up a breakpoint where you assume you have an issue. I'll typically connect one not long previously so I can see what's going on as we step into the issue code. We should set one in the phpinfo script just to get things moving.

Setting breakpoints
Generally, clicking in the left edge will set a breakpoint on the closest line. You can likewise set your cursor on the line and hit F9. Assuming that you have numerous functions approaches a similar line, that is a method for guaranteeing the breakpoint is on the right one. A red spot ought to show up in the left edge. This shows a breakpoint. It ought to likewise be recorded in the "breakpoints" part. Here is a picture to explain:

Note: we're still in the Troubleshoot view. I set a solitary breakpoint. Presently, when I right-click the red breakpoint circle in the edge close to the code, you can pick Alter breakpoint… to set up conditions in the event that you want to. Conditions are helpful, particularly in the event that you have a whole assortment however just a single component is causing an issue. I use conditionals constantly!

Other than contingent breakpoints, you have the choice to log a message and break after a specific number of hits. The last option is helpful when you have code that rehashes without a particular novel worth to set off a break on. For instance, you could have code to deliver parts in an assortment of parts. On the off chance that the thirteenth part causes a calamity, you can just set the hit build up to 13. I've needed to count physically too often to see the worth in this component!

With something like one breakpoint set, you're prepared to step through your code.

Venturing through code
Venturing through code is a mind boggling activity. It's easy to control, yet at the same there's a great deal going on. The debugger will assess factors, you can set watches on factors, and you approach the call stack. When the debugger is stopped on a breakpoint (or by physically stirring things up around town button/squeezing F6) you're prepared to step through the code. Take a look at Codester to buy php scripts.

Utilize this script to track:

You can step into functions (F11), get out of functions (Shift + F11), and step over functions (F10). You ought to become acclimated to utilizing the function keys to drive your investigating meetings; they'll go a ton smoother in the event that you do!

Weergaven: 1

Opmerking

Je moet lid zijn van Beter HBO om reacties te kunnen toevoegen!

Wordt lid van Beter HBO

© 2024   Gemaakt door Beter HBO.   Verzorgd door

Banners  |  Een probleem rapporteren?  |  Algemene voorwaarden