15 Best Twitter Accounts to Learn About 코인카지노

[Korn Cyndy]

Overview

™

This article covers the best procedure to update your ILOM's firmware. I found SUN's documentation really scattered about this important topic. I read through their PDF's and decided to use the ILOM to do this as opposed to command line where it was a bit more documented.

The scenario I found myself in was I was experiencing silly network interface issues, specifically with the "nge" interfaces. For example, I would configure nge0 with an IP address and it would be all good until I started to transfer a file through it. When transferring a file, it would start off OK but stall midway through, and after the stall I could no longer connect to the server through the network, only through ILOM. When opening the console through ILOM and ifconfig only showed my localhost interface and the nge0 had disappeared. Same behaviour if I configured nge1 as well. I 메리트카지노 thought it was a driver issue at first but after trying a few of Nvidias drivers both new and old the same thing occurred.

Notes:

Procedure

1. Download your files from Sun.

2. Setup your ILOM with a connectible address. I choose 192.168.2.2 for my ILOM. Login to your ILOM and do the following:

cd /SP/network

set pendingipaddress=192.168.2.2

set pendingipnetmask=255.255.255.0

set pendingipgateway=192.168.2.1

set pendingipdiscovery=static

set commitpending=true

3. Setup your laptop network card to be 192.168.2.1/24 and run a crossover cable from your laptop NIC to the network management interface in the back of the server. Open Firefox and enter "" and you should hit the ILOM. root/changeme is the default username/password.

4. First thing we need to do is figure out which upgrades we need to do. Sun kind of fails a little here and instead of being able to just grab the latest firmware, apply it, and be at the lastest revision, we need to apply each version in order. So for my M2 it ended up being 5 different firmware upgrades.

When you log into the ILOM you will find yourself on the Versions page. Here you can see your current installed version. So log in there and write down your version number.

Now if you look at the html file README in the software you downloaded in step 1 it will tell you the version it will upgrade to. Ex:

So you need to go through these README's now that you know your ILOM version and find the one that is the closest upgrade and start from there. In my case I had to apply the software from version 1.4, 2.0, 2.0.1, and 2.1 in that order. Once you figure out where you need to start move to step 5.

5. So the actual upgrading itself is not to difficult. We first need to shut down our guest operating system. Do an init 0 or stop /SYS from the ILOM.

6. When the OS is down, click on the Maintenance tab. You need to enter Maintenance Mode in order to do this, so click the Enter Maintenance button.

7. Next browse to the image file you downloaded. This needs to be the proper version, remember we figured this out in the previous steps. Hit Upload File and you will be brought to the Firmware Verification page. Confirm everything looks good here and is what you intended. If so click on Start Upgrade.

9. You should hit the Upgrade Status page. Sit back and let this do its thing.

10. Once finished you should get an upgrade complete window tell you the SP has been reset.

11. Your firmware and BIOS are upgraded at this point and you should be able to fire up the OS by typing start /SYS from the ILOM. However if you have a couple more versions to apply repeat from step 6. The first couple i upgraded i ended up confirming the OS came up after each flash, but now i just do the upgrades all at once, then apply the latest LSI update. Its your call, safest is obviously to confirm everything is good after each upgrade.

12. Once you are at the latest version its time to update your LSI Firmware.

Updating LSI Firmware

After updating your SP firmware and BIOS, its good practice to update your LSI controller firmware to the latest version. You will notice on the download page that each version also comes with a bootable iso image for updating the LSI controller. So unlike the SP firmware, you can grab the latest version of this software and apply it. So assuming you completed this process, lets continue:

Procedure

Troubleshooting

The only thing I've noticed is that sometimes you need to dump your browser cache, both cookies and saved files if the web application becomes flaky. By flaky i mean you get the Done. errors with yellow exclamation mark or its hangs on verifying your firmware or something similar.

Some cases where users are using a password longer than 16 characters, they may not be able to log into the web GUI until their password is reset to a password that is fewer than 16 characters.

A secret has been revealed in the news over the past few weeks. I was a part of that secret. What was the secret you ask? Men are now using skin care products as a part of their daily activities!

I started a few months ago due to something I learned about myself. I had my picture taken. Not just a standard picture. I had my picture taken with a special ultraviolet camera and light that shows damaged skin due to excessive sun exposure. First they took a picture of my face with standard light. Although not a flattering picture, it looked like I expected. Then they took a picture of my face with the ultraviolet light. What did I look like? I looked like I had a face FULL of freckles. Only these freckles weren't the cute ones that would have showed up in the first picture. They showed that I have a significant amount of sun damage. I guess my early years of working and playing outside all summer long with little or no sun protection is catching up with me.

It is common knowledge that sun damaged skin will cause premature signs of aging skin (wrinkling, "leathery" appearance and feel, etc.) as well as being a cause of skin cancer. So, I decided to do something about it. One of those things is to take better care of my skin. I am using skin care products that have a sunscreen built in. These same products also contain enzymes that can help speed cell renewal in sun damaged skin.

Yes, the secret is out. I am using skin care products every day. My wife says my complexion is also better because of it. I look forward to having my picture taken in the future. Maybe my complexion isn't the only thing that is improving.