Programmed Screw Locking Machine and Its Constituents

Programmed Feeder Machine/Programmed Allocator machine for screws

Programmed Screw Taking care of machine and screw allocators are normally utilized for assembling of apparatuses for the home. They are utilized for completing screw securing in item gathering. They guarantee the capability of good bundling in items. Their aspects commonly are 1900 by 800 by 600 mm. Their run range is successfully 800 by 400 by 200 mm which can be changed in view of the size of the item. The Electrical setup is BM6-Z which is high accuracy with Z pivot module locked. It has a chamber which is THK KK-60, parts that are SMC, engine driver from Panasonic, bits from Japan that are from HIOS Screwdriver, contact screen from WEINVIEW, KEYENCE FOS and Vacuum tube from MISUMI.

This is the way the machine works: Burden the items physically, sets the dance position naturally, locking mode begins running consequently, lock screw is naturally gotten done, and afterward empty the items physically. The machine includes a Succeed Record import of directions. It takes on a Japanese BM6-Z locking module and a screening feeder that is straightforwardly canny. The machine consequently wraps up locking the screw according to the pre-set facilitates. The Substitution items only need change of point directions of PLC lock. The machine has a yield that is High on first pass and is exact. Simultaneously, the screw nature of the lock is truly steady and intrinsically solid, the helper capability includes a slip discovery in screw likewise incorporates a spillage location of screw lock screw size chart. The machine likewise has a screw fluctuating lock acknowledgment, measurements for terrible screws and location for screw in. It likewise has a CCD based visual programming highlight, to ensure great exactness and comfort. This machine is proper to use for toys, PC, photoelectric and items put together with plastic.

Various Shaft in line Turn Programmed Fixing Machine/Programmed Attaching Machine for screws

The machine aspect depends on item size and is normally around 1900 by 800 by 600 mm. Its XYZ aspects ordinarily are 800mm by 400mm by 200mm. Its power utilization shifts from around 300W to 750W. The edge is made of a Steel plate, a rectangular cylinder and an aluminum combination outline. The system comprises of a Lead screw mechanical chamber, a servo engine and an Electrical/pneumatic blend. It includes a self taking care of BM6-Z taking care of way for the screws. The lock speed of the screw relies upon the length of the screw and course, it normally is 1.5-2.5 sec/time.

Most machines in this class have a greatest running rate of 500mm/s. These sorts of machines are utilized to the completed item screws locking on sequential construction systems, to guarantee that the items get a decent capability in bundling. These machines include a direction import capability from Succeed documents. These Machines have a programmed locking screw completing component that works as per the pre-set arranges. These machines gloat of an excellent starting pass yield and exactness. The nature of lock screw is dependable and stable.

Weergaven: 1

Opmerking

Je moet lid zijn van Beter HBO om reacties te kunnen toevoegen!

Wordt lid van Beter HBO

© 2023   Gemaakt door Beter HBO.   Verzorgd door

Banners  |  Een probleem rapporteren?  |  Algemene voorwaarden